| Carbon Fiber Cam Gear Cover: Mitsubishi Evolution IX 2006-Up |
| Carbon Fiber Mirror Covers: VW Jetta/GTi/Golf 1999-2003 |
| Carbon Fiber Cam Gear Cover: Toyota Celica |
| Carbon Fiber Lisc. Plate Backing: Nissan 350Z 2003-Up |
| Carbon Fiber Cam Gear Cover: Subaru WRX |
| Carbon Fiber Rear Bumper Heat Shield: S2000 2000-Up |
| Carbon Fiber Mirror Covers: Nissan 350Z 2003-Up |
| Carbon Fiber Sheet: 12 x 12 Inches Single Sided Double Sided |
| Carbon Fiber Radiator Cover: Nissan 350Z 2003-Up |
| Seats |
| Hard Tops |
| Grilles |
| Eye Lids |
| Side Skirts |
| Lip Spoilers |
| Doors |
| Fenders |
| Doors |
| Rear Spoilers |
| Hoods |
| Carbon Fiber Cam Gear Cover: Mitsubishi Evolution VIII 2003-2005 |
| Carbon Fiber Alternator Cover: Subaru WRX 2002-2007 |
| Carbon Fiber Radiator Cover: Subaru WRX |
| Carbon Fiber Radiator Cover: Honda S2000 2004-Up |
| Carbon Fiber Radiator Cover: Mitsubishi Evolution VIII 2003-2005 |
| Carbon Fiber Lisc. Plate Backing: Mitsubishi Evolution VIII 2003-Up |
| Carbon Fiber Mirror Covers: Honda S2000 2004-Up |
| Carbon Fiber Mirror Covers: Infiniti G35 2003-2007 |
| Carbon Fiber Rear Bumper Heat Shield: Evo 2003-Up (US Spec Only) |
| Carbon Fiber Mirror Covers: Scion 2003-Up |
| Carbon Fiber Mirror Covers: Toyota Celica 2000-Up |
| Carbon Fiber Spark Plug Cover: Mitsubishi Evolution 2003-Up |
| Front Bumper Canards Universal Front Bumper Canards Dodge SRT4 Mitsubishi Evolution Scion tC Subaru Impreza WRX |
| Carbon Fiber Rear Diffuser: Subaru WRX $620 |
| Carbon Fiber Rear Diffuser: Mitsubishi Evolution $695 |
| Carbon Fiber Radiator Cover: Toyota Supra |
| Carbon Fiber Front Wind Splitter Dodge SRT4 Hyundai Tiburon Mitsubishi Lancer GTS/Evolution Nissan 350Z Scion tC Subaru Impreza WRX |
| Carbon Fiber Front Air Dams Chevrolet Corvette (C6) $740 Honda S2000 & $515 Infiniti G35 Coupe $515 Mitsubishi Evolution $515 Subaru Impreza WRX $515 BMW 335 (07-Up) $650 |
| $285 |
| $165 |
| $95 |
| $150 |
| $145 |
| $150 |
| $130 |
| $140 |
| $140 |
| $140 |
| $10 5 |
| $95 |
| $120 |
| $145 |
| $13 0 |
| $110 |
| $1 20 |
| $110 |
| $95 |
| $95 |
| $95 |
| $95 |
| $130 |
| $45 |
| $30 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
CARBIGN CRAFT Carbon Fiber Rear Bumper Heat Shield
Honda S2000 2004-Up
Honda S2000 2004-Up
CBX-S2HSHIELD
| $145.88 |
| Has your exhaust melted off the paint or warped your stock S2000 bumper? The Carbign Craft Carbon Fiber Rear Bumper Heat Shield will hide and protect rear S2000 bumpers from getting burnt up. Unlike other exhaust heat shields for the S2000 , the Carbign Craft shield is made of vacuumed formed dry carbon fiber which allows for perfect factory fitment. Coated with a heat resistant epoxy coating, our heat shields will reduce fading effects from UV rays and hot exhaust fumes. |
CARBIGN CRAFT Carbon Fiber Mirror Covers
Honda S2000 2004-Up
Honda S2000 2004-Up
CBM-S2000
| $145.88 |
| Similar to the look of many exotic European cars, Carbign Craft Dry Carbon Mirror Covers spice up the look of stock mirror housings. Each Mirror Cover set comes with blue tinted, European style anti-glare convex lenses that increase the driver's field of vision. All Carbign Craft Mirror Covers are designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light. |
APR Radiator Cooling Plate for Spoon Intake, Carbon Fiber
Honda S2000 2000-Up
Honda S2000 2000-Up
APR-CF-930032
| $148.50 |
| To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay. |
CARBIGN CRAFT Carbon Fiber Radiator Cover
Honda S2000 2000-Up
Honda S2000 2000-Up
CBR-S2000
| $104.88 |
| Dressing up the look of your cooling system is another step of making your engine bay standout amongst others. Carbign Craft's Radiator Covers give your engine bay an exotic appeal while improving the flow of air into your radiator. Each Carbign Craft Radiator Cover is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of high engine bay temperatures. |
APR Spark Plug Cover, Carbon Fiber
Honda S2000 2000-Up
Honda S2000 2000-Up
APR-CF-930030
| $85.50 |
APR Formula GT3 Mirrors
Honda S2000 2000-Up
Honda S2000 2000-Up
| $289.88 |
APR-CB-920032B
APR Front Air Dam
Honda S2000 2000-Up
Honda S2000 2000-Up
APR-FA-924006
| $562.50 |
* Reduce lift.
* Increase front-end stability.
* Improve high-speed cornering grip
* Increase front-end stability.
* Improve high-speed cornering grip
Underbody components such as front air dams, undertrays, and rear
diffusers are essential for maximizing aerodynamic performance. The APR
Performance Front Air Dam integrates with the factory front bumper to
diffusers are essential for maximizing aerodynamic performance. The APR
Performance Front Air Dam integrates with the factory front bumper to
APR 67" & 61" GTC-300 Adjustable Wing
Honda S2000 2000-Up
Mounting bases cover factory spoiler/wing holes.
Honda S2000 2000-Up
Mounting bases cover factory spoiler/wing holes.
| $1250.00 |
APR-AS-106720
67"
67"
APR Front Bumper Canards
Honda S2000 2004-Up
Honda S2000 2004-Up
| $233.88 |
APR-AB-200212
* These APR Front Bumper Canards are made using pre-pregnated carbon
fiber manufacturing processes, for high strength and low weight.
* UV Resistant Coating
Each APR Front Bumper Canard is made with UV-stable epoxy and
clear-coat materials for resistance against fading.
* Mounting Hardware Included
Screws, nuts and bolts are all included to allow you to install the APR Front
Bumper Canards to your car.
fiber manufacturing processes, for high strength and low weight.
* UV Resistant Coating
Each APR Front Bumper Canard is made with UV-stable epoxy and
clear-coat materials for resistance against fading.
* Mounting Hardware Included
Screws, nuts and bolts are all included to allow you to install the APR Front
Bumper Canards to your car.
APR Front Bumper Canards are the perfect answer to aerodynamically tune
the handling for the front of a car. Made of lightweight and durable carbon
graphite composites, APR Front Bumper Canards help increase front
downforce at high speeds. The added downforce stabilizes the cars chassis
during hard cornering and increases traction for faster lap time
the handling for the front of a car. Made of lightweight and durable carbon
graphite composites, APR Front Bumper Canards help increase front
downforce at high speeds. The added downforce stabilizes the cars chassis
during hard cornering and increases traction for faster lap time
APR Front Wind Splitter
Honda S2000 2000 2009
Mounting bases cover factory spoiler/wing holes.
Honda S2000 2000 2009
Mounting bases cover factory spoiler/wing holes.
| $299.88 |
2000-2003 AP1 Honda S2000 without factory lip
Features:
* Carbon Fiber Reinforcement
All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
* Fully Functional Undertray
Our Front Wind Splitters are not just add on cosmetic pieces. Every APR
Front Wind Splitter completely covers the entire area below a cars front
bumper. This allows for smoother air flow below the front bumper,
creating more efficient downforce.
* Support Rods Included
Supporting every APR Front Wind Splitters are stainless steel Support
* Carbon Fiber Reinforcement
All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
* Fully Functional Undertray
Our Front Wind Splitters are not just add on cosmetic pieces. Every APR
Front Wind Splitter completely covers the entire area below a cars front
bumper. This allows for smoother air flow below the front bumper,
creating more efficient downforce.
* Support Rods Included
Supporting every APR Front Wind Splitters are stainless steel Support
To combat the effects of front end lift, APR Front Wind Splitters are utilized to
give extra traction and control in the front of a car. By creating a high
pressure area on top of the wind splitter, high pressure air flow is restricted
to flow underneath a car. With low pressure below the car, the effect of lift is
reduced and a driver can gain from the extra traction and control.
give extra traction and control in the front of a car. By creating a high
pressure area on top of the wind splitter, high pressure air flow is restricted
to flow underneath a car. With low pressure below the car, the effect of lift is
reduced and a driver can gain from the extra traction and control.
APR-CW-922001
2004-2009 AP2 Honda S2000 with factory lip
APR-CW-922004
2004-2009 AP2 Honda S2000 without factory lip
APR-CW-922002
2000-2009 Honda S2000 with APR Front Bumper w/ Air Dam Incorporated
APR-CW-924006
APR 59.5" wide 10" tall GTC-200 Adjustable Wing
Honda S2000 2000-Up
Mounting bases cover factory spoiler/wing holes.
Honda S2000 2000-Up
Mounting bases cover factory spoiler/wing holes.
| $699.88 |
APR-AS-105900
The GTC-200 adjustable wing offers the perfect amount of downforce for
midsize and compact cars.
Computational Fluid Dynamics (CFD) analysis was performed on this wing to
support validation of its aerodynamic design.
Each GTC Series airfoil is composed of lightweight and durable carbon fiber
reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite
materials. CFRP models contain pre-pregnated woven carbon fiber sheets for
superior strength and low weight. FRP models contain woven pre-pregnated
glass fiber sheets for high strength at reasonable weight. All CFRP and FRP
airfoils are made using pre-pregnated composite manufacturing processes
(i.e. high-temperature autoclave and vacuum bagging) in high-quality
aluminum molds.
Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum
pedestals that come in a flat black powder coat finish.
midsize and compact cars.
Computational Fluid Dynamics (CFD) analysis was performed on this wing to
support validation of its aerodynamic design.
Each GTC Series airfoil is composed of lightweight and durable carbon fiber
reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite
materials. CFRP models contain pre-pregnated woven carbon fiber sheets for
superior strength and low weight. FRP models contain woven pre-pregnated
glass fiber sheets for high strength at reasonable weight. All CFRP and FRP
airfoils are made using pre-pregnated composite manufacturing processes
(i.e. high-temperature autoclave and vacuum bagging) in high-quality
aluminum molds.
Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum
pedestals that come in a flat black powder coat finish.
With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an
adjustable wing that means serious business. The GTC-300 3D airfoil shape
allows for optimal airflow that reduces drag yet supplies an effective amount
of downforce. Computational Fluid Dynamics (CFD) analysis was performed
on this wing to support validation of its aerodynamic design. The results of
this analysis are available here.
Each GTC Series airfoil is composed of lightweight and durable carbon fiber
reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite
materials. CFRP models contain pre-pregnated woven carbon fiber sheets for
superior strength and low weight. FRP models contain woven pre-pregnated
glass fiber sheets for high strength at reasonable weight. All CFRP and FRP
airfoils are made using pre-pregnated composite manufacturing processes
(i.e. high-temperature autoclave and vacuum bagging) in high-quality
aluminum molds.
Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum
pedestals that come in a flat black powder coat finish.
Center section to outer section angle difference: 15 degrees
adjustable wing that means serious business. The GTC-300 3D airfoil shape
allows for optimal airflow that reduces drag yet supplies an effective amount
of downforce. Computational Fluid Dynamics (CFD) analysis was performed
on this wing to support validation of its aerodynamic design. The results of
this analysis are available here.
Each GTC Series airfoil is composed of lightweight and durable carbon fiber
reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite
materials. CFRP models contain pre-pregnated woven carbon fiber sheets for
superior strength and low weight. FRP models contain woven pre-pregnated
glass fiber sheets for high strength at reasonable weight. All CFRP and FRP
airfoils are made using pre-pregnated composite manufacturing processes
(i.e. high-temperature autoclave and vacuum bagging) in high-quality
aluminum molds.
Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum
pedestals that come in a flat black powder coat finish.
Center section to outer section angle difference: 15 degrees
| $1250.00 |
APR-AS-106120
61"
61"
APR Rear Diffuser
Honda S2000 2004-Up
Carbon Fiber
Honda S2000 2004-Up
Carbon Fiber
Diffusers work in conjunction with other aerodynamic components of a car
to help produce downforce. Because a car displaces air as it moves forward,
the air molecules in the rear of the car get disrupted causing a vacuum of
low pressure air.
To help channel the high speed air flow coming from underneath the car,
diffusers redirects the high speed air flow to transition smoothly transition
into the low pressure vacuum in the rear. This encourages a smoother
flowing air flow underneath the car and allows better performance from
other aerodynamic components such as aerodynamic wings.
to help produce downforce. Because a car displaces air as it moves forward,
the air molecules in the rear of the car get disrupted causing a vacuum of
low pressure air.
To help channel the high speed air flow coming from underneath the car,
diffusers redirects the high speed air flow to transition smoothly transition
into the low pressure vacuum in the rear. This encourages a smoother
flowing air flow underneath the car and allows better performance from
other aerodynamic components such as aerodynamic wings.
2004-Up Honda S2000 (AP2)
APR-AB-922020
2000-2003 Honda S2000 (AP1)
APR-AB-921020
2004-Up Honda S2000 (AP2) Rear Diffuser Replacement Hardware
APR-AA-100072
ACCESSORIES
2000-2003 Honda S2000 (AP1) Rear Diffuser Replacement Hardware Pack
APR-AA-100073
| $659.50 |
| $13.50 |
APR Rear Diffuser
Honda S2000 2004-Up
Fiber-Reinforced Plastic (FRP)
Honda S2000 2004-Up
Fiber-Reinforced Plastic (FRP)
2004-Up Honda S2000 (AP2)
APR-FAB-922020
2000-2003 Honda S2000 (AP1)
APR-FAB-921020
2004-Up Honda S2000 (AP2) Rear Diffuser Replacement Hardware
APR-AA-100072
ACCESSORIES
2000-2003 Honda S2000 (AP1) Rear Diffuser Replacement Hardware Pack
APR-AA-100073
| $465.50 |
| $13.50 |
 | |  |
 | |  | |  | |  | |  |
 | |  | |  | |  | |  |
Custom Search
WBR Import/Export
Scott Marlow (owner)
Sugar Land, Texas U.S.A
Bus: (832) 886-1677
Fax: (832) 886-1678
scott@scottmarlow.net
1 (866) 761-0974
Scott Marlow (owner)
Sugar Land, Texas U.S.A
Bus: (832) 886-1677
Fax: (832) 886-1678
scott@scottmarlow.net
1 (866) 761-0974
| Carbon Fibre |
| Carbon Fiber |
 | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  |
 | |  | |  |
