Ford Racing
Engine
Complete Assembly
$9,131.99
M-6007-S347JR2
Ford Performance Parts
347CI 350HP CRATE ENGINE-SEALED RACING X2 CYLINDER HEAD

Ford Sealed Racing Engines are built to professional racing series standards and deliver reliable lasting performance. These aren't built from
repackaged production parts, but real racing parts like Forged Crank, Rods and Pistons with full floating piston pins. Based on the Ford Performance
BOSS 302 block these engines deliver reliable and consistent performance lap after lap. S347JR has been approved for use in the American Canadian
Tour (ACT) Late Model series
Built for asphalt and circle track racing series that require a sealed or "crate" racing engine
347 cubic inches - 4.030" bore - 3.400" stroke
Ford Performance BOSS 302 race block M-6010-BOSS302
350 hp @ 5500 rpm  - 400 lb-ft of torque @ 4000 rpm with headers, and 2V 500 CFM Holley carburetor not included)
10.5:1 Compression ratio (nominal)
SCAT forged crankshaft
SCAT forged steel cap screw connecting rods
Forged Mahle pistons with floating pin
Comp Cams 35-410-8 Hydraulic roller camshaft .533" lift intake and exhaust, duration at .050" is 206 degrees intake and exhaust
Double roller timing chain set M-6268-A302
High-performance 7 quart rear sump circle track oil pan
MSD billet distributor
ARP Head Studs
Ford Performance aluminum "X2" cylinder heads M-6049-X2 with 1.94" intake valves and 1.54" exhaust valves
PAC® 1219X ovate beehive valve springs
1.60:1 ratio roller rocker arms M-6564-B351
Edelbrock Performer RPM Air-Gap dual plane aluminum intake manifold
Edelbrock water pump
MSD billet distributor
High volume oil pump M-6600-D2
Ford Performance polished aluminum valve covers M-6582-CT2
High-performance SFI Approved vibration damper M-6316-D302
Engine weight as equipped is 414 lbs. (includes 7 quarts of oil)
Engine is sealed for circle track competition where rules allow
Competes against GMPP "603" crate engine
Engine is internally balanced, "0" balance flywheel required
Flywheel not included
INSTALLATION NOTES: See engine installation and tuning tips below. Some or all of the following items may need to be changed from your original
engine or modified for proper installation:
This engine has a rear sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump, and non-EFI valve
covers.
The timing chain cover will work with most regular rotation water pumps
Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers
The damper M-6316-D302 may require a spacer for pulley alignment
Ford Performance flywheel M-6375-D302B is not included but will work for most 157-tooth manual transmission applications. For other transmission
applications use the proper "0" balance flywheel
Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order)
Built with current available parts. Photo and specs may vary
$9,819.99
M-6007-D347SR
Ford Performance Parts
347 C.I.D. 415 HP Sealed Long Block Crate Engines

Ford Performance Parts 347 c.i.d. 415 hp sealed long block crate engines will deliver the power and torque that you have been looking for.

Features include:

* 415 hp at 6,000 rpm (with headers and a 650 cfm Holley carburetor not included)
* 400 ft.-lbs. of torque
* Heavy-duty racing engine block
* Forged steel crankshaft
* Forged steel cap connecting rods with forged 10:1 compression pistons
* Hydraulic roller camshaft, 0.528 in. lift, and 226 degrees duration at 0.050 in. lift
* Double roller timing chain
* Ford Performance Parts aluminum Z cylinder heads with 2.02 in. intake and 1.60 in. exhaust valves
* 1.65 ratio aluminum roller rocker arms
* Single plane Victor Jr. intake manifold
* Heavy-duty water pump, timing cover, oil pan, and high performance harmonic balancer
$10,582.99
M-6007-D347SR7
Ford Performance Parts
347 C.I.D. 415 HP Sealed Long Block Crate Engines

Ford Performance Parts 347 c.i.d. 415 hp sealed long block crate engines will deliver the power and torque that you have been looking for.

Features include:

* 415 hp at 6,000 rpm (with headers and a 650 cfm Holley carburetor not included)
* 400 ft.-lbs. of torque
* Heavy-duty racing engine block
* Forged steel crankshaft
* Forged steel cap connecting rods with forged 10:1 compression pistons
* Hydraulic roller camshaft, 0.528 in. lift, and 226 degrees duration at 0.050 in. lift
* Double roller timing chain
* Ford Performance Parts aluminum Z cylinder heads with 2.02 in. intake and 1.60 in. exhaust valves
* 1.65 ratio aluminum roller rocker arms
* Single plane Victor Jr. intake manifold
* Heavy-duty water pump, timing cover, oil pan, and high performance harmonic balancer
American Auto Parts
.
Sugar Land, Texas
scott@scottmarlow.net
American Auto Parts
1-866-761-0974  or  832-886-1677
SAVE 5% on Bank transfers
cash or
ZELLE bank to bank
WBR American Auto Parts
.
.